110 found, showing page 5 of 8
BEADING BIT 3/8"RADIUS 1/4"SHANK
Add an attractive bead profile to furniture and millwork with Freud beading bits. For rounding over work, add a Freud 62-104 bearing and 62-313 step washer.
- 3/8" Radius Beading Bit with 1/4" Shank
- Overall Diameter: 1-3/8"
- Cuts all composition materials, plywoods, hardwoods, and softwoods.
- Use on hand-held and table-mounted portable routers.
View Details
Call for Price
ROMAN OGEE BIT FREUD
Profile Can Be Changed By Changing The Height Of Bit. Cuts All Composition Materials, Plywood, Hard Wood And Soft Wood. Use On Hand Held And Table Mounted Portable Routers. 3/8" Bearing Diameter.
- Roman Ogee - Carbon Tipped
- 1/4" Shank - 2-3/16" O.A. Length - Carded
- Cut Dia X Carb Ht : 1-1/16 X 1/2
- Add Distinctive Design To Cabinets, Furniture, Plaques And Millwork With These Decorative Edging Bits
- Ideal For Decorative Edges For Cabinets, Molding And Furniture
- Use On Hand Held And Table Mounted Portable Routers
- TiCo Hi-Density Carbide Specifically Designed For Each Application To Increase Performance
- Perma-Shield(R) Non-Stick Coating Protects From Heat, Gumming, And
Corrosion
- Ground Carbide With Titanium For Long Life
- Anti-Kickback Design For Safety
- Individually Computer Balanced For Vibration-Free Operation
View Details
Call for Price
ROMAN OGEE BIT FREUD
Profile Can Be Changed By Changing The Height Of Bit. Cuts All Composition Materials, Plywood, Hard Wood And Soft Wood. Use On Hand Held And Table Mounted Portable Routers. 3/8" Bearing Diameter.
- Roman Ogee - Carbide Tipped
- 1/4" Shank - 2-3/8" O.A. Length - Carded
- Cut Dia X Carb Ht : 1-3/8 X 23/32
- Add Distinctive Design To Cabinets, Furniture, Plaques And Millwork With These Decorative Edging Bits
- Ideal For Decorative Edges For Cabinets, Molding And Furniture
- Use On Hand Held And Table Mounted Portable Routers
- TiCo Hi-Density Carbide Specifically Designed For Each Application To Increase Performance
- Perma-Shield(R) Non-Stick Coating Protects From Heat, Gumming, And
Corrosion
- Ground Carbide With Titanium For Long Life
- Anti-Kickback Design For Safety
- Individually Computer Balanced For Vibration-Free Operation
View Details
Call for Price
CLASSICAL COVE FREUD
Computer Balancing Of Bits Will Insure A Smooth Vibration Free Cut. Cuts All Composition Materials, Plywood, Hard Wood, And Soft Wood. Use On Hand Held And Table Mounted Portable Routers. 1/2" Bearing.
- Cove & Bead - Carbide Tipped
- 1/4" Shank - 2-1/4" O.A. Length
- Cut Dia X Carb Ht. : 1-1/2 X 5/8
- Add Distinctive Design To Cabinets, Furniture, Plaques, And Mill Work With These Decorative Edging Bits
- Use On Hand-Held And Table-Mounted Routers
- Ideal For Decorative Edges For Cabinets, Molding And Furniture
- TiCo Hi-Density Carbide Specifically Designed For Each Application To Increase Performance
- Perma-Shield(R) Non-Stick Coating Protects From Heat, Gumming, And
Corrosion
- Ground Carbide With Titanium For Long Life
- Anti-Kickback Design For Safety
- Individually Computer Balanced For Vibration-Free Operation
View Details
Call for Price
CHAMFER BIT FREUD
Chamfer Size Is Easily Adjusted By Changing The Height Of The Bit. Cut All Composition Materials, Plywood, Hard Wood And Soft Wood. Use On Hand Held And Table Mounted Portable Routers. 1/2" Bearing Diameter.
- Chamfer
- Carbide Tipped
- 1/4" Shank - 45 Degree Angle - 2-3/16
- O.A.Dia X Carb Hght : 1-1/2 X 1/2
- Creates A Uniform Chamfer On The Edge Of Any Work Piece To Add Character, While Retaining Crisp Geometric Lines
- Chamfer Size Easily Adjusts By Changing The Height Of The Bit
- Use On Hand-Held And Table-Mounted Portable Routers
- TiCo Hi-Density Carbide Specifically Designed For Each Application To Increase Performance
- Perma-Shield(R) Non-Stick Coating Protects From Heat, Gumming, And Corrosion
View Details
Call for Price
CHAMFER BIT FREUD
Chamfer Size Is Easily Adjusted By Changing The Height Of The Bit. Cut All Composition Materials, Plywood, Hard Wood And Soft Wood. Use On Hand Held And Table Mounted Portable Routers. 1/2" Bearing Diameter.
- Chamfer
- Carbide Tipped
- 1/4" Shank - 45 Degree Angle - 2-3/16
- O.A.Dia X Carb Hght : 1-3/4 X 5/8
- Creates A Uniform Chamfer On The Edge Of Any Work Piece To Add Character, While Retaining Crisp Geometric Lines
- Chamfer Size Easily Adjusts By Changing The Height Of The Bit
- Use On Hand-Held And Table-Mounted Portable Routers
- TiCo Hi-Density Carbide Specifically Designed For Each Application To Increase Performance
- Perma-Shield(R) Non-Stick Coating Protects From Heat, Gumming, And Corrosion
View Details
Call for Price
CHAMFER BIT 40-114
Chamfer Size Is Easily Adjusted By Changing The Height Of The Bit. Cut All Composition Materials, Plywood, Hard Wood And Soft Wood. Use On Hand Held And Table Mounted Portable Routers. 1/2" Bearing Diameter.
- Chamfer
- Carbide Tipped
- 1/2" Shank - 45 Degree Angle - 2-9/16
- O.A.Dia X Carb Hght : 1-3/4 X 5/8
- Creates A Uniform Chamfer On The Edge Of Any Work Piece To Add Character, While Retaining Crisp Geometric Lines
- Chamfer Size Easily Adjusts By Changing The Height Of The Bit
- Use On Hand-Held And Table-Mounted Portable Routers
- TiCo Hi-Density Carbide Specifically Designed For Each Application To Increase Performance
- Perma-Shield(R) Non-Stick Coating Protects From Heat, Gumming, And Corrosion
View Details
Call for Price
FLUSH TRIMMING BIT FREUD
FLUSH TRIMMING BIT FREUD
View Details
Call for Price
FLUSH TRIMMING BIT FREUD
FLUSH TRIMMING BIT FREUD
View Details
Call for Price
FLUSH TRIMMING BIT FREUD
Bits Can Do More Than Just Trim Laminate, Can Be Used For Pattern Work. Cuts All Composition Materials, Laminates, Plywood, Hard Wood And Soft Wood. Use On Portable Or Table Mounted Routers. 3/8" Bearing. Ground Carbide With Titanium For Long Life. Anti-Kickback.
- Laminate Flush Trim
- Carbide Tipped
- Two Flute
- 1/4" Shank - 2-13/16" O.A. Length - Carded
- Cut Dia. X Carb Ht : 1/2 X 1
- These Are The Bits To Rely On For A Smooth, Burn-Free Cut. Two Flutes Provide Faster Cutting And Three Flutes Yield A Superior Finish
- Use On Portable Or Table-Mounted Routers
- Ideal For Trimming Laminate Counter Tops And Doing Pattern Work
- Double-Fluted For Faster Cutting
- TiCo Hi-Density Carbide Specifically Designed For Each Application To Increase Performance
- Perma-Shield(R) Non-Stick Coating Protects From Heat, Gumming, And
Corrosion
- Anti-Kickback Design For Safety
- Individually Computer Balanced For Vibration-Free Operation
View Details
Call for Price
